Backrests

Width adjustable only, non-removable back support hardware.

Easy drop-in hardware option for active and lightweight back supports.

The lightweight Drop Mount hardware is simple to operate with a single combined clamp and mechanism unit. The release mechanism is simple to operate, and suitable for single-handed use, and those with limited hand function. The hardware gives plenty of adjustability and rigidity and can be used on a wide range of wheelchair frames.

For smaller chairs and as a lightweight option

Single Mount hardware is a lightweight option for lower height back supports and has two point of attachment to the back support canes of a wheelchair. Like Dual Mount, this hardware option also offers simpler set up, increased adjustability, angle, and growth.

Increased adjustability, angle & growth

Dual Mount hardware has two points of attachment to the back support canes of a wheelchair and offers simpler set up, increased adjustability, angle, and growth. It utilises the same quick-release hook and latch operation to secure the back support. Please note, this hardware option cannot be used on most wheelchairs that have a horizontal back cross brace.

Mounting hardware tested and rated for heavier users.

A biangular back support with two adjustable sections to accommodate gluteal shelf and excess adipose tissue, for bariatric wheelchair users up to 300kg.

The XLella2 provides a higher degree of trunk support by offloading the posterior side of the pelvis to accommodate a gluteal shelf. Its lower section has a total of 85⁰ of adjustment, with 55⁰ posterior and 30⁰ anterior. This maximises pressure distribution and relief, to assure adequate postural support, and ultimately provide comfort.

Rigid back support with contouring capabilities to shape and configure, for bariatric wheelchair users up to 300kg.

The XLella Classic Back Support is designed to support users with larger pressure distribution who require a back support with the possibility to create shapes and contours for postural support and/or changing needs. The Spex unique contouring cube system can be shaped and configured as many times as needed.

Enabling freedom without compromising posture and comfort, Zygo is a back support with inbuilt laterals designed for full-time self-propelling wheelchair users.

Active wheelchair users don’t want to be held back – they want the freedom to go places and do amazing things.

Zygo back support systems are lightweight, easily adjustable, easy to install and remove, more breathable and more personalised.

The Back Support that stretches for future growth!

The Growth-Adjust Back Support has in built height adjustment due to it’s unique shell style. Future-proof for user’s growth or a preferred change in Back Support height with the precise sliding adjustment function to accommodate up to 5” / 12.5cm of growth.

The innovative growth adjustment system has an upper sliding interface, meaning that from the initial wheelchair setup the prescriber can be confident that the back support can adjust in height as the user grows.

This is particularly effective for paediatrics. The foam and upholstery unit is matched for the longest growth setting of the Back Support, so there is no requirement to purchase different sizes of padding as the user grows.

The growth-adjustable shell is available with the following padding options:

• Growth-Adjust: For users with symmetrical postures
• Growth-Adjust Spex Classic: Contourable cube padding for users with asymmetries and require pressure reduction