Everyday Living Aids

This jar and bottle opener has three sunken cones of different sizes, lined with a non-slip material. When a jar or bottle is pressed in the appropriate cone, it is gripped, leaving both hands free to twist the lid. Can be used in conjunction with certain opener's. Fitted with four non-slip feet. Suitable for jars 44-108mm in diameter.

A coated wire cradle that holds most styles of jug kettles and pivots on a raised wire frame by gentle pressure on the handle to assist with pouring. The kettle sits in the cradle and is secured by an elasticised strap. The frame has a built-in stop for positioning the mug and a back stop to prevent spillage if the kettle is accidently released during pouring. The frame has non-slip feet. Not suitable for cordless or mini jug kettles.

This unique designed seat encourages proper alignment of the pelvis and thighs, evenly distributing body weight for extended comfort while sitting. It cushions the tailbone, sitting bones and thighs to help alleviate pressure points and assist circulation. Lightweight and portable, the Obusforme seat promotes sitting comfort for prolonged periods anywhere. The removable front zippered section adjusts the depth to accommodate almost any chair.

A simple inexpensive device to assist with putting on stockings or socks, especially if bending and reaching to the foot is difficult. It consists of strong shaped, flexible plastic gutter with long cotton tapes attached to the top. The stocking or sock is fed on to the plastic and held in place with the side notches. Then it is placed on the floor and the foot is put in the open end of the stocking, which is pulled over the foot and up the leg using the tapes.

A simple inexpensive device to assist with putting on tights, especially if bending and reaching to the feet is difficult. It consists of two strong shaped, flexible plastic gutters with long cotton tapes attached to the top. The tights are fed on to the plastic and held in place with the side notches. Then it is placed on the floor and the feet are placed in the open end of the tights, which is pulled over the feet and up the legs using the tapes.

This wooden stick with a rubber tip at one end and a special double wire hook at the other, is used to pull on or push off garments that connot be reached easily such as socks or coats

These strong moulded turners simply hook over the top of a "x" type tap, to make it easy to turn. They are supplied as a red and blue pair for hot and cold taps.

This device is used to give good leverage for turning small difficult items eg gas or radiator taps, curled knobs etc. The head is made from white ABS plastic and includes a bed of sprung stainless steel rods, which when pressed around an object, retract, conform around its shape and provide a purchase around it when the handle is turned. The handle is a black plastic T-piece which is easy to grip. Small and portable.

The simple white nylon moulding offers a generous curved built-up handle for a key, providing an easy grip and good leverage for turning. The single key is held by a brass screw fitting, through the hole normally used for a key ring. When not in use the key folds into the handle, to fit conveniently in a pocket or hand bag.

The simple blue nylon moulding offers a generous curved built-up handle for two keys. it has a moulded nylon locking lever, attached to the brass fittings to enable both keys to be positioned separately for use or locked back into the body of the handle. When not in use the keys fold into the handle, to fit conveniently in a pocket or handbag.